::: Beko 14.2 power supply New User Oct 4, 2008, 8:52 PM Post #1 of 2 (1130 views) Beko 14.2 power supply Can't Post I have a Beko 14.2 chassis in a Bush WS6680SIL tv. There is a fault in the power supply, it won't start up correctly. I have the manual and have made some measurements on the board. The problem appears to be that the Thyristor that connects the 145v (14.5v in standby) to the 12v line in standby is not triggering. This leads to a lack of 3.3v and the non operation of the main logic chip used to switch out of standby.

BUSH WS6680SIL 28'. How JustAnswer works. I need a manual for a Cobra Power Inverter Model CPI2590-CBL and also a remote for that unit. Remote code required for UK Bush tv model WS6680SIL/C7 I am trying to make my 'Sky remote v.8' this one>>>- Bush WS6671 28' TV question.

Does anyone have a service manual for this tv?

Caracteristicas De Windows Server 2003 Standard Edition. The Voltages on the diode side of the optocoupler are way too low - but that is fed from the 12v line, which is way too low because the thyristor is not conducting. I can't quite see how the whole thing is meant to start up.

Anyone with experience of this chassis like to suggest something?? New User Oct 21, 2008, 6:04 AM Post #2 of 2 (1080 views) Re: [Thejuke] Beko 14.2 power supply [ ] Can't Post On your schematic, check the B+ voltage, if it is not within tolerance of the schematic format, then replace the voltage regulator specified on prints. Search for () - Page loaded in: 0.22 s on (CGI/1. Crack Do Jogo Deer Hunter 2004. 1).